2013 Mercedes Benz Sl Class
For 60 eld the two letters “SL” birth had a secret vibrancy among self-propelling enthusiasts. They represent muscular sportiness, exciting pattern, effortlessly higher-up manner, proficient innovations and the ultimate in technology art. The Mercedes-Benz SL-Class transmissible these genes from its father, intentional as a racer. In 1952 it came to the external wash tracks, saw and conquered. It was from this car that Mercedes-Benz derived the commencement series-production manakin in 1954, the fabled 300 SL gullwing. And ever since, Mercedes-Benz has been setting the bar high in the luxury sports car segment with the SL over five model generations.
The unique combination of systematic sportiness, refined luxury and yet unrestricted suitability for everyday use at the same time is what makes the Mercedes-Benz SL-Class the dream car it is – and it is also what lies behind its success where sales are concerned. The SL was always ahead of its time technically – even when it was rolling off the production line for 18 years at a time, as was the case with the SL bearing the internal code R107 (from 1971 to 1989). Over 650,000 SL vehicles have left the production halls in Sindelfingen and Bremen since 1954, and from the last model generation alone – which celebrated its premiere in 2001 – nearly 170,000 specimens found their way into the hearts of the enthusiasts amongst fans of high-calibre sports cars.
2013 Mercedes-Benz SL-Class
The new generation of the Mercedes-Benz SL-Class now being presented is the sixth to follow the 1952 racing car. In the unique tradition of the SL it is entering its era as an athlete, refined aesthete and innovative trendsetter with an extraordinarily high utility value. Mercedes-Benz is initially offering the new SL with two engines – as the SL350 with a V6 engine and as the SL500 with a V8. The new BlueDIRECT engines have an output of 225 kW (306 hp) in the SL350 and 320 kW (435 hp) in the SL500 (a 12-percent increase over the predecessor).
Moreover, the new Mercedes-Benz SL-Class breathes new life into the meaning of the famous abbreviation “SL” – super-light – through systematic weight reduction. For the first time ever, Mercedes-Benz is implementing an all-aluminium bodyshell in series production. The newly developed vehicle weights approximately 110 kilograms less than a comparable bodyshell made of sheet steel. Nevertheless it is even more rigid – and safer – than its predecessor. Mercedes-Benz has achieved this through a systematic intelligent material mix of aluminium alloys and aluminium components which are tailor-made for the respective requirements, combined with just a few portions of high-strength steel and magnesium.
Although the new SL is even more comfortable and has more safety devices on board than its predecessor and therefore does actually sacrifice some of the weight saved through the aluminium bodyshell, the scales show some astonishing figures: the new SL500 (1785 kg) weighs around 125 kilograms less than its predecessor. On balance, the SL350 (1685 kg) is even 140 kilograms lighter – all thanks to a host of other intelligent enhanced details to reduce weight, which Mercedes-Benz has also implemented in the new SL in addition to the aluminium bodyshell.
And these measurement results do not just impress as figures on the page; they are very much perceptible and tangible in practice, too. The resulting increase in longitudinal and lateral dynamics facilitates superb performance with a decided passion for cornering. The greater track width at both the front (+ 38 mm) and rear (+ 77 mm) axle serves the handling which is at once sporty and agile and keeps the car under safe control. Drivers will find the new Mercedes-Benz SL-Class even more agile than its predecessor – sheer pleasure for those of a sporty orientation.
There are two suspension variants from which to choose. The SL is supplied as standard with semi-active adjustable damping (lowered by ten millimetres in the AMG sports package). The active suspension system ABC (Active Body Control) is available as an optional extra. Unique the world over, it has been enhanced especially for the new SL.
In keeping with the Mercedes-Benz tradition, the new SL couples its sharpened athletic profile and agile nimbleness with a luxurious ambience. Its high-quality equipment and appointments contribute to the exquisite motoring pleasure that can be experienced every kilometre of the way. Fine materials, finished with great attention to detail, shape its style and character. The levels of comfort here – unique in the segment of luxury sports cars – blend with high everyday practicality, for the new SL shines with top marks where open-top motoring, suspension comfort and comfort on long journeys are
concerned – plus its exemplarily low background noise, which is comparable with that of a saloon. This all adds up to the fact that this vehicle is a Gran Turismo in the very best sense of the word.
The safest and the most sparing
Thanks to the crash-optimised aluminium structure, standard-fit PRE-SAFE® and assistance systems on the same high level as the S-Class, the SL is the world’s safest roadster.
What’s more, it is the most frugal one in its class. The SL350 consumes 6.9 litres over 100 kilometres, which is virtually 30 percent less than its predecessor (CO2 159 g/km). The SL500, too, posts a persuasive set of efficiency figures: 9.1 litres per 100 kilometres (minus 22%) correspond to 212g/km CO2.
The design, meanwhile, displays all the classic proportions so characteristic of the SL. Right from the first glance the masculine-looking roadster with a broad tail end is immediately identifiable as a member of the current family of sports cars from Mercedes-Benz. It emphasises its autonomy through a multitude of details created with loving care.
The sixth generation of the Mercedes-Benz SL-Class also offers a vario-roof that can be retracted into the boot using an electrohydraulic mechanism to save space, converting the SL into a roadster or a coupé, depending on the driver’s wishes and the weather. Unlike its predecessor, three versions are available for the new SL: painted, with a glass roof or with the unique panoramic vario-roof featuring MAGIC SKY CONTROL. The transparent roof switches to light or dark at the push of a button. When light it is virtually transparent, offering an open-air experience even in cold weather. In its dark state the roof provides welcome shade and prevents the interior from heating up in bright sunlight.
With two innovations, the new SL remains true to its tradition as technological trendsetter:
Both innovations are part of the extensive standard equipment of the new SL.
Design: Masculine, muscular athlete’s physique
The design of every Mercedes-Benz SL has an obligation to a great legend, and yet it is always very clearly looking to the future. The designers have unmistakably showcased the youngest generation of the style-defining roadster on the basis of tradition, but also with new perspectives and visions. This has resulted in a formal identity and the high overall aesthetic quality.
In the interplay between innovation and tradition we have created a stylish, sporty and elegant luxury sports car with the classic, well-balanced hallmark SL proportions: the long bonnet is followed by a compact, set-back passenger compartment. A broad, muscular, racy-looking tail end completes the picture.
Design boss Professor Gorden Wagener: “The athletic, sports star’s physique with its masculine, muscular character says a great deal about the new SL and confidently emphasises its status as the high-performance heart of our brand. At the same time, discerning athletic standards are met by powerfully sculpted surfaces formed by just a few lines and beautifully crafted details. The traditional design elements from our rich history are more than visual quotations. They tell of the courage and the pioneering spirit which have shaped our brand, and reflect these properties in a contemporary way – with enthusiasm and passion. Alongside top technical performance and innovations, it is also this which makes the new SL an unmistakable character.”
The front signals a self-confident presence
Visually, the new SL is clearly marked out as a prestigious member of the current Mercedes-Benz sports car family. At first glance this is evident from the very upright classic sports car radiator grille which has featured on all the Mercedes-Benz vehicles with a sporty character – right from the initial generation of the SL. The central star in the radiator grille points the way to the future: it is a contemporary reinterpretation of the famous trademark, which now runs into the centrepiece with organically flowing contours.
What’s more, on the new roadster the designers have waived the classic
separation of the bumper and the radiator grille. The lower edge of the grille now dips into the bumper, supporting the pronounced V-shape and resulting in more formal presence. In addition to this, the steeply positioned radiator grille lengthens the bonnet in visual terms. Two air outlet grilles, each with two chromed fins, have their roots in Mercedes-Benz’s traditional, dynamic design repertoire. A succinctly sculptured edge – developing from the upright radiator grille – draws across the long bonnet in a taut arch and flows organically into the A-pillar.
Dynamically positioned at an angle, headlamps located far on the outside flank the distinctive front and the broad air intake, giving the new roadster its own inimitable look. It appears masculine and it does also radiate a certain restrained aggressiveness.
The standard-specification ILS headlamps are characterised by very high-quality tubes for the low and main beam which have been styled with great attention to detail, plus a chrome bracket surrounding the main headlamp and the flared arrangement of the indicator lamps and sidelights. All the further functions feature LED technology – such as the distinctively curved sidelights and the horizontal band of the daytime running lamps in the outer sections of the bumper.
The silhouette displays muscles with character
A minimal amount of artistically styled lines define the athletic yet smooth surfaces of the flanks. The shoulderline rises from the headlamps and stretches like a tensed muscle over the entire length of the vehicle and into the tail lights. Side grilles with fins in the front wings stylishly cite the classic SL legend and form the starting point for a feature line. This structures the proportions and lends the vehicle a visual forwards thrust even at a standstill. It tapers out in the tail light as a discreet line.
Free-standing exterior mirrors located on the beltline not only support the modern character of the side view; thanks to this position they also improve vision of the road.
Depending on the engine variant, various light-alloy wheels are available in 17-inch and 18-inch versions. The exquisitely bordered wheel arches are designed for a maximum size of 19 inches at the front and 20 inches (only in the case of AMG) at the rear.
Muscular tail end
A small number of sweeping lines shape the broad, clearly defined tail end. Elegantly flowing and at the same time racy and muscular, it forms the roadster’s distinguished finishing flourish that is so full of character. Thanks to the boot lid with its steel interior and plastic panelling, it has been possible to stow the aerials out of sight inside the vehicle so that they do not interrupt the flowing lines in the rear area. This is also the case with the roll-over protection, which lies hidden from view in the body and is only activated in case of danger.
Tail lights with LED High Performance technology highlight the width of the tail end. They taper inwards to a point and have a discreet kink in the contour. The rear fog lamp is located centrally between two trapezoidal exhaust tailpipes. A horizontal swage line in the lower area of the bumper provides added emphasis of the broad effect.
The colour range for the exterior encompasses twelve different paints. These include the BRIGHT paint diamond white and the special colour cerussite grey metallic SHAPE – the first matt paint in the standard-specification paint range for a Mercedes-Benz model series.
Interior and appointments: Luxurious comfort and sporty precision
The interior of the new SL impresses with its generous amount of space, high-quality materials, high sense of perceived value and lovingly crafted details displaying tangible and visible precision.
Compared with its predecessor, the new generation of the SL is much longer (+ 50 mm to 4612 mm) and wider (+ 57 mm to 1877 mm), providing more room for more comfort in the interior, too. Shoulder room (+ 37 mm) and elbow room (+ 28 mm) have been increased, exceeding the dimensions normally found in this vehicle class. Clear lines create a formally coherent internal space within this comfortable interior. Perfectly in tune with the roadster’s character, it combines the unpretentious atmosphere of a high-performance sports car with the comfortable, stylish ambience you come to expect in a luxurious touring car.
The wrap-around effect has class
In conjunction with the beltlines on the doors and the parcel shelf, the upper section of the dashboard creates a formal unity and – with the exception of the black interior – it is always styled in a contrasting colour. Generously used wood trim extends from the centre console across the dashboard into the doors, creating a pleasant wrap-around effect. Three types of wood along with two different aluminium trim finishes are available (high-gloss brown walnut, satin-finish light brown poplar, high-gloss black ash), plus two differently treated longitudinal-grain aluminium trim parts (light or dark). The links between the dashboard, centre console and door trim panels have been styled so that they are continuous and they support the wrap-around effect. Minimal gap dimensions please the eye and represent the high precision with which the SL is manufactured.
High-quality instruments add emotionally appealing flourishes
In the area of the dashboard, four circular ventilation outlets provide some striking eye-catching touches. Set in metal, these air vents are reminiscent of jet engines and are a contemporary, emotively interpreted way of paying homage to the history of Mercedes-Benz sports cars.
Inside two tubes the sporty instrument cluster boasts classic round dials with three-dimensional graduated rings, back-lit dials in the centre of the tachograph and rev counter, plus high-quality needles. In the centre between the two round dials, a colour display provides information from the on-board computer and indicates vehicle functions. The system is operated via a three-spoke sports steering wheel with shift paddles and twelve function buttons. The steering wheel featuring a flattened bottom section has an ergonomic grip area and galvanised spokes, and is covered with nappa leather – in the airbag section, too.
A large COMAND colour display in the centre of the vehicle takes care of the numerous display functions for the entertainment, communication and navigation facilities. A particularly eye-catching feature on the tunnel of the centre console is a new DIRECT SELECT shift lever. Small and fine, it is a true visual highlight. Like the central rotary knob for operating the COMAND system, it is optimally positioned from an ergonomic point of view. Located in front of these controls is the lidded compartment for the two cup holders.
Spotlight on the stylish ambience
Making dynamism visible is what it’s all about where the ambient lighting in the SL is concerned. The fibre-optic cables with three colour options to choose from stretch between the beltline and the door centre panel in one tier over virtually the entire length of the door, behind the trim on the dashboard and in the front panelling.
Seats with a noble, sporty character
The new Mercedes-Benz SL-Class’s fully electric seats with a memory function meet discerning and wide-ranging standards regarding seating comfort, ergonomics, safety and sportiness. The ergonomically optimised seats themselves are more slender than in the predecessor and emphasise the noble, sporty character. This is underlined in visual terms by sophisticated stitched seams and by a layout which varies depending on the choice of leather. Alongside excellent lateral support, the seats also offer high levels of comfort.
The superstructure of the seat cushion and backrest is formed by a weight-optimised welded construction of steel and sheet metal panel parts. This structure also makes a significant contribution towards transverse support for the sidewall in the event of a lateral collision. In addition, a thorax-sidebag is installed in the backrest. A newly developed combination of a sine spring core principle with rubberised matting and a foam layer as damping ensures support and comfort.
Both the driver and the passenger can adjust their seats precisely according to their requirements and body measurements. Even in the standard equipment there are extensive electrical adjustment options available for doing so, enabling fore-and-aft and height adjustment to be made just as easily as the seat cushion angle, cushion depth and backrest angle adjustment. The crash-responsive head restraints are also adjustable for height. The range of equipment also includes 4-way lumbar support adjustment – this feature is housed in the centre section of the backrest cover. The occupants can operate it via the central control panel and the head unit. Using the memory buttons, the current seat position can be stored, and on the driver’s side this also applies to the positions of the steering wheel and exterior mirror.
A very attractive solution has been found for convenient access to the rear compartment for easy loading – in both visual and functional terms. A button on the shoulder of the backrest operates the backrest lock electrically and enables the seats to be moved forwards and backwards in order to create sufficient room to manoeuvre.
Also part of the standard specification is a seat occupancy sensor with automatic child seat recognition on the front-passenger side – for child seats with a transponder specially approved for Mercedes-Benz.
For enhancing comfort even further, in the case of the leather appointments the seats are covered with sun-reflecting leather. This specially coated leather reflects the heat of the sun and, in particular where the appointments colours are dark, it reduces the extent to which the surface heats up. In combination with the optional active ventilation the thermal seat comfort is tangibly improved.
The following seat variants can be selected as an optional extra:
Health and comfort-conscious climate
The control panel for the standard-specification luxury automatic climate control THERMOTRONIC featuring separate temperature adjustment for the driver and passenger has been redesigned and revised. Mercedes-Benz has placed particular emphasis on new technologies for saving energy. They include a window demisting sensor integrated in the base of the interior mirror. It measures the window temperature and interior humidity and transmits these data to the climate electronics. They can use them to determine whether the windscreen has misted up. If this is not the case, in A/C operation it can continuously adjust the compressor in the background if no dehumidification is necessary. In other words: thanks to the sensor, the compressor can be operated as required, saving drive energy. The A/C function can remain permanently active. A further advantage is that, as the air conditioning only dehumidifies and cools as much air as necessary, dry eyes are prevented – a tangible gain in terms of comfort.
The air conditioning is also linked to the ECO start/stop function and can therefore also regulate the climate during the stop phases.
So that SL drivers can enjoy an open-air experience even when the weather is cool, the innovative neck-level heating system AIRSCARF is available as an optional extra – as was the case with the predecessor. Warm air flows through a nozzle at the front of the head restraints, and the system directs it around the head and neck area of the occupants.
Room for luggage and lots of equipment
Suitability for everyday use is a key word which is traditionally taken extremely seriously at Mercedes-Benz – even in the case of vehicles designed to be very sporty. This is why the occupants in the new SL will find plenty of stowage facilities for larger and smaller items alike. In addition to the glove compartment, the centre console offers three stowage compartments within easy reach:
A lockable rear box behind the driver’s seat creates additional stowage space. Its catch is automatically closed when the vehicle is locked.
In the lower section of the door trim, a long, open door pocket offers further, easily accessible stowage space. As no bass loudspeakers have to be fitted in the door thanks to the Frontbass system, Mercedes-Benz makes sensible use of the space gained here by adding an extra stowage compartment, which can be used for an umbrella, for instance.
The designers have also thought the details through: smaller but useful items can be fixed in place by a net on the centre tunnel of the passenger’s footwell.
The design of the boot is largely determined by the vario-roof, which has to be housed in the upper part of the boot when the roof is open. In total the new SL offers luggage capacity of up to 504 litres – 364 litres with the roof stowed. There is always room for stowing luggage or two golf bags without any problems at all, thanks to the optimised boot design.
A luggage cover which can be adjusted lengthwise with a handle prevents pieces of luggage from colliding with roof elements in the boot when opening the roof. Only when the cover is adjusted to the rear can the vario-roof be opened. Anyone wanting to use the entire boot capacity when the roof is closed can adjust the cover to the front or remove it completely.
At the press of a button, the roof elements stowed in the boot can be tilted upwards by about 25 degrees to make loading and unloading easier – as was the case in the predecessor (Easy-Pack system).
The compressor and the TIREFIT filler bottle are housed in a stowage compartment in front of the recess which can be accessed by lifting up the boot floor.
HANDS-FREE ACCESS – ‘kick’ to open
One of the new products and features from Mercedes-Benz is a system known as HANDS-FREE ACCESS, which is included in the KEYLESS-GO package. It is available on request for the new SL for the first time anywhere in the world, and it allows drivers to operate the boot lid without using their hands. This work is taken care of by a hydraulic drive system, for which the control signals are given by the SL owner without touching anything, but by making as though to kick the area of the rear bumper with their foot; doing so activates this fully automatic comfort-increasing equipment. Mercedes-Benz is the only manufacturer to offer a system which not only opens but also closes the boot lid automatically.
With the innovative convenience function HANDS-FREE ACCESS there is no longer any need for drivers to have to get annoyed by having to put their purchases and other objects down on the – often dirty – ground when out shopping and when they literally have their hands full, in order to reach for the handle. Should an unintentional ‘kick’ result in the boot lid opening or closing without the driver wanting this to happen, a second kick will correct it. When this occurs, the automatic system interrupts the procedure and reverses the effect of the signal given in error by actuating the boot lid against the original direction of movement – in the case of unintended opening, the second kick closes the boot lid again.
An appropriate safety program facilitates unhindered use of the HANDS-FREE ACCESS system. An acoustic signal provides the information that an opening or closing procedure has been initiated, and an automatic reversing function stops the boot lid as soon as the system recognises that there is an obstacle blocking the boot lid.
For the HANDS-FREE ACCESS system to be included, the vehicle must be fitted with KEYLESS-GO – this allows non-contact access to the vehicle In addition to this the correct KEYLESS-GO vehicle key has to be in the vicinity of the vehicle, so in order to open the doors it can, for example, stay in the driver’s coat pocket or handbag. In order to activate the HANDS-FREE ACCESS system for the boot lid, the KEYLESS-GO key must not be further than 1.5 metres away from the rear end of the vehicle.
Body and bodyshell: Aluminium comes up trumps
Cars are becoming increasingly safer, more comfortable, but often heavier as well. The new Mercedes-Benz SL not only stops this trend, it turns it around. In spite of increased comfort, performance and safety, it is 140 kilograms lighter than its predecessor.
The greater part of the weight-reduction “diet” is hidden from the eyes of the observer of the SL. Under the aluminium outer skin there is a bodyshell made almost entirely from aluminium, only very few components being made from other materials. The even lighter magnesium is used in part for the cover behind the tank. The A-pillars and the roof frame are of steel sheet metal incorporating high-strength steel tubing. For these elements steel is the best solution to provide survival space for occupants in the event of the vehicle overturning.
The bodyshell of the Mercedes-Benz SL-Class is the first all-aluminium bodyshell to be produced in large series at Mercedes-Benz. This entirely new development weighs 254 kilograms and is thus 110 kilograms lighter than a comparable steel bodyshell. Further extensive lightweight design features compensate the additional weight unavoidably caused by the increased comfort, the new assistance systems and other technical features. Under the bottom line an enormous weight advantage remains for the new SL. As the SL500 it weighs 125 kilograms less than its predecessor, while the SL350 weighs 140 kilograms less than its previous version. And its preceding model already had a lightweight aluminium bonnet and doors.
“The effect is rather as if a heavyweight-class passenger had got out of the car and taken their heavy flight luggage, too” says Dr Thomas Rudlaff, responsible for the aluminium bodyshell at Mercedes-Benz. “The result is perceptible and measurable. Less weight means more dynamism and less consumption. In other words: the motoring enjoyment increases and the environmental burden decreases.”
For the roadster the aluminium bodyshell is superior to a steel construction
The developers at Mercedes-Benz did not rest content achieving weight benefits alone. The aluminium structure had to be superior to a steel construction in terms of rigidity and comfort as well. In order to attain this high objective, developers consistently went for an intelligent lightweight construction, and explored many new paths to do this. Every single component of the aluminium bodyshell was specifically optimised for its particular function and expected loads. Thus, diverse processes are used to make different kinds of aluminium depending on the use the component is to be given: the parts are made by chill casting or vacuum die casting, worked into extruded aluminium sections or into aluminium plates of thicknesses that vary within one and the same component; these are what are known as the tailored welded blanks. Expressed in numbers, the bodyshell weight is made up of: 44 percent cast aluminium, 17 percent aluminium sections, 28 percent aluminium sheet metal, 8 percent steel and 3 percent of other materials.
At the Bremen production facilities the parts are assembled using diverse load-adequate joining methods, some of which are innovative processes. Secure joints are ensured, for example, by MIG welding, hemming, bonding, self-piercing rivets, flow hole bolting, or friction stir welding – a joining method by which a highly resistant weld seam is produced by means of friction heat; a method particularly well-suited to aluminium on account of its low melting point.
Particular highlights of the bodyshell:
The sum total of all the design measures leads to a lightweight, torsionally and flexurally rigid bodyshell with an optimum rigidity/weight ratio. It was possible to increase the bodywork’s torsional rigidity by more than 20 percent over the already highly rigid preceding model series. This is confirmed by measurements of the new SL’s torsional strength – at 19400 Nm per degree the roadster achieves an absolute top value (its predecessor already reached 16400 Nm per degree).
Meets the highest safety standards
At the same time the high-strength structural elements of the aluminium bodyshell make the new SL even safer than the preceding model in the event of a collision. Extrusion-moulded sections, connecting cast nodes and a double-thickness plate floor form a passenger compartment that is just as lightweight as it is sturdy. Two aluminium sections in each door together with the side sills (very rigid thanks to their internal chamber structure) and crash-resistant seats provide the greatest possible survival space in the event of a side collision.
A front end deformation zone acting on several levels and in which the aluminium front axle subframe is integrated as an additional third longitudinal member, distributes collision forces to a large area, conducting them past the passenger compartment. And in the rear, too, there is sufficient energy-absorbing deformation potential. A structural cage made from chilled cast longitudinal members, transversal sections and a cast magnesium tank separation bulkhead also contribute to this. This is also where the fuel tank is nested in a crash-protected manner above the rear axle. This way all the
statutory safety requirements are met as well as the even stricter ones from Mercedes-Benz.
Best marks for NVH comfort
Thanks to its innovative aluminium bodyshell concept, the new SL is also unique among the roadsters in terms of NVH comfort (noise, vibration, harshness). One contributing factor towards its optimum vibration and road roar characteristics is a very rigid connection between the front section and rear floor, allowing relaxing travel even over long distances, and at the same time offering impressive driving dynamics.
Although aluminium features a higher sound emission and radiation level than steel, the new SL is the quietest vehicle in its class. Mercedes-Benz compensates for the acoustic disadvantages of aluminium by means of a consistent sound insulation concept with targeted adaptation of the sound damping materials to each problem zone, and through the use of innovative sound-insulation materials:
A further contribution to the good interior acoustics is the laminated glass windscreen with acoustic film. The transparent, highly resilient film absorbs the vibrations of the windscreen and reduces the perceptible sound level in many frequency ranges.
The precision workmanship on the acoustics goes so far as to ensure that the hydraulic pump for the electrohydraulic vario-roof is encapsulated and decoupled from the bodyshell. In addition to this, a newly developed insert nozzle sees to it that the pressure pulsation in the pump is reduced to a minimum right from the outset. This means that pump noises are only barely audible for the driver and passenger.
The doors and the bonnet, too, are lightweight
The intelligent material mix is completed by the boot lid, of SMC-hybrid design (SMC = sheet moulding compound). It consists of a single-shell synthetic material panel mounted on a steel reinforcement. Both materials have virtually identical thermal expansion coefficients and complement each other very well. The interior steel construction permits maximum rigidity with minimum use of space, while the plastic panelling allows the full integration of the aerials for navigation, digital radio and mobile telephony out of sight in the rear area so that the SL does not need to carry a bothersome aerial stump on its aerodynamically refined body.
The bonnet of the SL is made from aluminium, as was that of its predecessor. It was optimised in terms of form and materials, contributing towards the outstanding pedestrian protection.
The doors, too, are of a lightweight design and made from aluminium. They are fashioned from a combination of sheet metal, extruded sections and cast metal parts, joined by diverse methods: riveting, bonding and hemming. Their aluminium and steel hinges are friction-based and are infinitely adjustable to any desired angle when opened, so that when getting into or out of the car they can remain securely open at any angle permitted by the space available at the side. This is particularly desirable in cramped parking conditions such as in a garage or car park.
Unique item of equipment: MAGIC SKY CONTROL
The proven electrohydraulic vario-roof – which turns the roadster into a closed coupé with a fixed roof in just a few seconds at the push of a button – has been intelligently enhanced, with Mercedes-Benz continuing to play the pioneering role here. For the new SL Mercedes-Benz is for the very first time offering drivers the choice between three variants of the lightweight-construction vario-roof:
The operating principle is based on the physics of a plate condenser: if the glass structure is subjected to an electrical voltage, particles in the structure position themselves so that light is able to pass through the glass. If the voltage remains switched off, however, the particles position themselves randomly. This partially blocks the light, and the glass remains dark. The control unit and converter are integrated into the front section of the roof, and the switch is in the overhead control console.
In addition to the unique panoramic effect and transparency at the touch of a button, MAGIC SKY CONTROL also provides an atmosphere of wellbeing. UV and infrared light are also effectively blocked in transparent mode, while insulation increases even more significantly in the darkened mode, thereby helping to keep the temperature on interior parts such as armrests cooler by up to ten degrees Celsius compared with conventional green glass.
Since the innovative glass also shields against the sun’s rays far more effectively than conventional thermal insulation glass or sunblinds, the occupants of the new Mercedes-Benz SL-Class will also enjoy the highest level of climatic comfort at the same time. When driving with the roof open would be unpleasant due to intense heat, the driver and passenger are able to remain composed under the MAGIC SKY CONTROL roof – making an important contribution towards driver-fitness safety, a concept which Mercedes is well known for promoting. Even when the vehicle is at a standstill the interior does not overheat, since the roof is switched to darkened mode when powered off.
But MAGIC SKY CONTROL not only benefits the occupants. Some of the strain is also taken off the air conditioning, thereby saving on CO2 emissions.
The frame of the three roof variants is now made of magnesium. This makes each roof around six kilograms lighter than in the previous model, giving the car a lower centre of gravity, and therefore better agility.
The engineers have refined the operating mechanism for the roof and boot lid. It now takes less than 20 seconds to open or close the roof completely.
Sophisticated corrosion protection concept
The aluminium bodyshell of the new SL offers no point of attack for corrosion. A sophisticated surface protection concept ensures the preservation of the brilliant look both of the outside skin and of the underside of the sheet metal panels, thus simultaneously protecting the renowned reliability and value stability of Mercedes-Benz vehicles. The protection concept was developed and tested on the basis of the environmental burden in different climate zones of the world and the specific loads the vehicle is subjected to.
The foundation for maximum corrosion resistance is formed by corrosion-resistant aluminium alloys and design features, while the few steel vehicle components are all fully galvanised. High-quality zinc/nickel coatings or special electrochemical insulation measures prevent contact corrosion with aluminium. All the seams are meticulously sealed, the surfaces protected through cathodic dip priming and multiple coats of paint. Sectors particularly exposed to corrosion are additionally protected with wax, to ensure that the pristine aspect of the new car is preserved for a long time.
Intelligent Light System and LED tail lights as standard
The headlamps on the new SL have been enhanced. As part of its standard specification, the new roadster is equipped with the Intelligent Light System (ILS) featuring bi-xenon headlamps. A driving direction indicator, sidelights and the daytime running lamps with LED technology complete the Intelligent Light System.
The tail lights on the new SL benefit from the advantages offered by the LED technology. LEDs light up approximately 150 milliseconds faster than conventional bulbs, plus they have a considerably longer life and conserve current. In the SL’s tail lights, the LEDs also light up with differing intensity in a targeted manner in certain sections of the tail lights, depending on the light function. This technology ensures an unmistakable night design.
Rear reversing lights and rear fog lamps are integrated into the rear bumper. The third brake light featuring LED technology is integrated in the boot lid above the Mercedes star.
Lightweight construction under the microscope: Progress in detail
Right from the word go the target was ambitious: the aim was for the new Mercedes-Benz SL-Class to tip the scales weighing five percent less than the previous model. Already declared the benchmark, the predecessor itself was a shining example boasting various lightweight design measures, even including bonnets made of aluminium. At the same time, the specifications book prescribed more comfort, more output coupled with considerably reduced consumption and fewer emissions, plus a more rigid bodyshell and even more safety. These demands would render the vehicle heavier and not lighter – that was clear. The experts calculated a weight increase of at least 75 kilograms.
Only a lightweight construction on a totally new level – which included all the vehicle components in the equation – could reconcile these contradictory requirements. In actual fact, the developers at Mercedes-Benz have succeeded in undercutting the ambitious weight targets. The new SL500 weighs no less than 125 kilograms less than the predecessor of the same name. This corresponds to a reduction of 6.5 percent. Meanwhile the SL350 even manages to exceed the high expectations even further – with its weight saving of 140 kilograms – equating to 7.7-percent less.
Bodyshell. Converting the entire bodyshell to aluminium cuts its weight by 24 percent in contrast with a steel bodyshell featuring comparable properties (a weight saving of 110 kg). Even the upper door hinges consist of aluminium.
Damping. The switch from absorber foams to sprayable acoustic compositions with variable layer thicknesses which can be shaped according to requirements, plus modified underbody panelling, results in weight savings in the order of 2.5 kg.
The guide rails for the window lift mechanisms are now comprised of aluminium instead of steel, amounting to a weight saving of 0.5 kg.
Vario-roof in magnesium/plastic design.The front part of the roof and the C-pillar are produced in magnesium/plastic, plus there are additional optimisation measures regarding the design of the tubular frame, rear shelf, rear window frame and roof frame. The weight reduction amounts to 15 kg.
Glazing. The windscreen is 0.5 millimetres thinner, with an acoustic film. The weight reduction amounts to over 1 kg.
The rear windscreen is 0.7 millimetres thinner, resulting in approximately 1 kg less weight.
Interior. The dashboard mount consists of a continuous IHP aluminium tube with magnesium struts and moulded-on polymer brackets. The weight reduction is 2.2 kg.
With the introduction of shift-by-wire technology, the large shift lever has been replaced by a joystick-like lever. This DIRECT SELECT gearshift system weighs only one sixth as much as the automatic selector lever used in the preceding model. The weight saving is 1.4 kg.
The boot floor is in the form of a polyurethane honeycomb plate instead of the wood plate previously used. The passenger’s foot plate has been switched over to plastic from steel, saving 1.5 kg in weight.
Seat. New seat structure with new adjustment motors, but a standard-fit 4-way lumbar support and crash-responsive head restraint. Weight savings: 11 kg.
Electrics. Thanks to an intelligent dynamic load management system, two batteries are no longer necessary; one 95 Ah battery in the boot is sufficient, supported by a 12 Ah battery for the ECO start/stop function. Weight savings: approx. 4 kg.
Every vehicle is given a customer-specific wiring harness for the interior, cockpit and engine compartment. Thanks to this tailor-made cable harness, additional weight in the form of wires which are surplus to requirements can be saved – to the tune of up to 0.4 kg.
The innovative Frontbass system avoids the need for a separate woofer and door loudspeaker. Weight reduction: over 4 kg.
Axles. The four-link front axle had already undergone extensive weight optimisation for the preceding model, featuring steering knuckles and spring links made of aluminium. The two front-axle halves now consist entirely of this material. The integral support frame for the front-axle halves, steering gear and engine is also produced in aluminium. Total weight savings: 11 kg.
The rear-axle subframe consists of high-strength steel with adapted panel thicknesses. It has been optimised in accordance with the specific engine line-up for the SL350, resulting in a weight reduction of 2.6 kg over the SL500.
Suspension, Damping. The standard-specification semi-active adjustable damping in the SL350 is lighter than the standard suspension system, saving 10 kg in weight.
Brakes and pedals. Optimised brake cooling eliminates the need for large and thus heavy brake discs on the front axle. Weight savings: 3.8 kg.
Lightweight wheels. New standard-fit lightweight wheels for the SL500 are around 15 percent lighter than cast wheels. Weight saving: approx. 4 kg
Wheel bolts with a weight-optimised head. Weight saving: approx. ¼ kg.
MAGIC VISION CONTROL adaptive windscreen washing system: Visibility as if by magic
An astonishing experience: the wiper blade glides over the badly soiled windscreen of the new SL, without a sign of a cleaning water jet, the occupants do not notice anything yet the windscreen is still cleaned! The new SL is the first vehicle to be equipped with the adaptive MAGIC VISION CONTROL wiper/washer system developed by Mercedes-Benz. It cleans the windscreen without the splash of water that usually briefly disrupts the driver’s field of view in the case of conventional windscreen washing systems – something that is especially unpleasant at night or when the sun is low in the sky and at high speeds.
In fact, the windscreen cleaning operation in the Mercedes-Benz SL-Class is still performed with washer fluid in the conventional manner. The innovation lies in the way the fluid is conducted to the windscreen in order to clean it. This is done by means of water guides integrated on both sides along the wiper blade – one on the left and one on the right – with minute laser-cut spraying holes. Via these channels, the innovative washer/wiper system always supplies washing fluid to the windscreen discreetly, precisely where it is needed: just in front of the wiper blade lip, according to the direction of movement of the wiper. The holes are distributed along the entire length of the wiper blade, being more closely spaced towards the outside of the blade, where it sweeps a greater area, than closer in, where the area swept is smaller.
Programs for summer, winter and cabriolet operation
Mercedes-Benz controls the MAGIC VISION CONTROL system intelligently via three partly autonomous wash programs – for summer, for winter and for cabriolet driving. It is the first windscreen wipe/wash system anywhere in the world to operate in this way. In summer, small quantities of water are sufficient to remove a light powdering of dust. In winter the dirt mixed with de-icing salt requires a greater amount of water. The MAGIC VISION CONTROL system works in accordance with the outside temperature, and it also automatically adapts the washer fluid quantity to the surrounding conditions.
A particularly interesting feature of the SL Roadster is the Cabriolet function: when the hardtop is down, the electronic control system reduces the amount of water, apart from which it demands the required water mainly on the downward stroke of the wiper arm. This way the windscreen can be conveniently cleaned during the journey and with an open roof, without any of the water spraying into the vehicle interior. Another pleasant side effect is that, since the washer fluid is directed specifically and in a well-metered manner to the area to be cleaned, one doesn’t douse anyone else in the surroundings with water, either, and it also doesn’t distribute any spray onto the vehicles behind. At the end of the day, a better cleaning effect is attained with up to half the amount of washer fluid. It has therefore been possible to reduce the volume of the washer fluid reservoir by 1.7 litres compared with the preceding model. This in turn contributes to a reduction in weight and consequently to greater efficiency.
Winter-proof thanks to the heated system
On request the MAGIC VISION CONTROL wiper blades are completely heated on the new SL, making Mercedes-Benz the first manufacturer in the world to offer a fully heated wiper/washer system. It consists of a washer fluid container heated through coolant waste heat, electric heating for the entire hose system and, as a newly-developed highlight, a fully heated wiper blade. This effectively prevents the formation of snow on the wiper blades, so typical in winter. To do this each of the spring rails of the blade is equipped with a heater foil with an output of 35 watts per blade. It heats the spoiler and the wipe lip. Snow and ice cannot freeze onto the blade; it remains supple in winter, too, and always cleans well.
The heating is also controlled as required according to the duration of operation and the outside temperature. It is only below a temperature of minus 20 degrees Celsius that the system makes use of the entire system’s maximum output, 270 watts. Between 5 degrees above and 20 degrees below zero the heating operates in an energy-saving mode and only requires the output needed to thaw out the wiper/washer system and keep it free of snow and ice.
Aerodynamics: Breezy, but never bothersome
Open-top motoring should be nothing but sheer pleasure: smelling the forests and meadows, hearing the birds singing, savouring the sound of the sea, feeling the warmth of the sun. And in spite of this proximity to the natural world, the occupants in the new SL do not have to relinquish comfort. Even at higher speeds they are largely unaffected by any strong winds. In this respect, just like its predecessor, the new luxury roadster is unsurpassed by no other open-top two-seater.
First and foremost it is the rigid aluminium bodyshell and – one of the brand’s hallmarks – sophisticated aerodynamics which ensure excellent comfort during open-top motoring. The designers’ intelligent and highly efficient work has resulted in superb aerodynamic properties for the SL in several respects. This means that the roadster earns top marks in no less than four important disciplines within its segment:
Top-class: cd figure
The new SL shines with a cd figure of 0.27 (in the SL350). Never before has a vehicle in the roadster segment achieved such a low cd. At the same time, the cLR value (the coefficient of lift at the rear axle), which is decisive when it comes to braking stability, is reduced by 0.01. This ensures a lower lift at the rear axle than at the front axle – which is important for comfortable, safe handling at high speeds and/or when there is a crosswind.
The fact that not only could the cd figure be cut to a record low but that it was also possible to reduce the wind resistance as a whole is even more astounding when taking into account the fact that the new SL’s frontal area is around four percent larger than that of its predecessor – due in part to its wider track. The product of the frontal area and the cd figure is, however, smaller.
Alongside a great deal of precision work, some of the other factors which contribute towards the low cd figure are:
A newly developed aero wheel which is part of the standard specification for the SL350 also significantly reduces the wind resistance. Its rim section is largely closed, which means that the air flowing through the wheel to the exterior disturbs the air flowing past at the outside of the wheel than is the case with a conventional wheel. Together with tyres which have been specially tuned to this end, the aero wheel cuts the frontal area – which is also a decisive factor in determining the wind resistance – by 0.01 square metres. This pays off in the form of a reduction in consumption, which results in one gram per kilometre fewer carbon dioxide emissions.
In order to minimise wind resistance even further, the six-cylinder version of the new SL also employs an adjustable radiator shutter. This consists of a large number of louvres and is positioned between the radiator and the radiator fan. An actuator fixed to the engine’s cooling module can be turned to close or open the flow path of the cooling air. In this way the flow of air through the radiator and through the engine compartment can be regulated as necessary. This means that if the engine has low-level cooling requirements, the wind resistance falls, as do the fuel consumption and emissions.
Top-class: wind noise on a par with that in a saloon
Where wind noise is concerned, the predecessor of the new SL was already the benchmark in its segment. But its successor surpasses this high level. It is even possible to hold a conversation, listen to the radio and make a telephone call at high speeds. This is thanks in part to the new stand for the exterior mirror. Its shape facilitates optimum flow; both when the inflow is straight and in the case of crosswinds it causes only low wind noise.
The windscreen fitted with multi-layer foil also contributes towards the exemplarily low interior noise, combining a low component weight with good acoustic properties. Low-frequency sounds which can arise through vibrations in the vehicle’s bodyshell can to a large extent be prevented by the new SL’s aluminium bodyshell, through design measures which were taken into account and tested at an early stage.
Top-class: maintaining a draught-free interior
Even at speeds of around 200 km/h the new SL offers extraordinarily high comfort during open-top motoring, setting new standards here. When the vario-roof is closed and the side windows are lowered, a welcome breeze can be felt during hot weather. Even putting the side windows up tangibly reduces it. The occupants in the new SL enjoy a comfortable and virtually draught-free ride as soon as they use a draught-stop. A conventional, manually operated folding-frame draught-stop comes as part of the standard specification. Covered with a finely meshed, synthetic textile fabric, this draught-stop is mounted behind the seats and folded up by hand. It covers the entire area behind the seat backrests as far as the upper edge of the head restraints. It can be taken off and stowed in the boot as necessary.
A highlight comes in the form of a new electrically operated draught-stop which is available as an optional extra. This new development can also be extended and retracted by the driver or passenger during the journey, via a switch in the centre console. If the switch is operated, a trapezoidal frame is unfolded electrically, and when it reaches its final position a finely meshed textile fabric covers it, thus keeping the area behind the occupants virtually free of draughts. Once it has been retracted, the frame disappears completely in the rear compartment trim cover.
The innovative neck-level heating system AIRSCARF is also available as an optional extra. It emits preheated air from an orifice in the head restraint, and this warm air then wraps itself around the neck area of the occupants like an invisible scarf, therefore even making it possible to have the roof open when the temperature is cool, without any serious inconvenience.
Top-class: anti-soiling measures
Clean exterior mirrors and side windows are important factors where safety is concerned, yet all too often drivers cannot take them for granted. In this respect, the new SL profits from the detailed work carried out by the aerodynamics engineers and can to a large extent ensure clear vision for drivers – even when it is raining. This is achieved mainly through a precisely tuned package of anti-soiling measures. The A-pillar trim with a new shape features an aerodynamically and aeroacoustically tuned front edge and a water guide channel on the top edge prevent water from flowing from the windscreen to the side windows. The new exterior mirror has also been optimised for journeys during rainy weather. Water guide runnels and additional drip edges have been integrated into its housing, and to a large extent they keep water away from the mirror glass, and shift the break-away point of the droplets to the outside. As a consequence of the aerodynamic measures the side windows soil only slightly.
Engine and drive system: The power and the economy
Rich power reserves plus modest fuel consumption – this formula describes the fundamental characteristics of the new SL models. They owe this in part to the two V6 and V8 units from the new generation of BlueDIRECT engines from Mercedes-Benz. As is already the case with the S-Class and the CLS, they now also enable the SL to achieve previously unattained marks for efficiency in its segment. The V8 in the new SL500 has at its disposal 4663 cubic centimetres of displacement from which it achieves 320 kW (435 hp) – so in spite of having around 0.8 litres less displacement that’s some 12 percent more than its predecessor (285 kW/388 hp). The consumption, meanwhile, falls by up to 22 percent, with the torque increasing at the same time from 530 Nm to 700 Nm – an increase of 32 percent. The V6 engine for the SL350 has the same displacement as its predecessor – 3499 cubic centimetres – from which it now achieves 225 kW (306 hp). Whilst this means that its output is 7 kW less than the engine in its predecessor (232 kW/315 hp), as the torque simultaneously climbs from 360 Nm to the current figure of 370 Nm, there is no perceptible loss of power – on the contrary, in fact: when accelerating, the new SL350 even proves superior. Plus the new V6 impresses with its outstanding consumption figures. It is content with 6.8 litres over 100 kilometres, making it almost 30 percent more economical than its predecessor (9.7 l/100 km).
Thanks to the economy of both engines, it has been possible to decrease the volume of the fuel tank from 80 litres to 65 litres. Nevertheless a greater range is available than was the case with the predecessor.
Of a torquey disposition when sprinting
The acceleration times from 0 to 100 km/h go to prove that economy does nothing to dampen torquey spirits. Despite a nominal reduction of 7 kW, the SL350 covers this sprint in 5.9 seconds, which is three tenths faster than its predecessor. From a standstill the SL500 races to the 100 km/h mark in 4.6 seconds, making it eight tenths faster than the previous SL500.
Both engines are exemplary when it comes to in-gear acceleration, too. Proof positive can be found in acceleration from 80 to 120 km/h in 4th gear, for only good figures facilitate fast and safe overtaking on rural roads. 5.5 seconds for the SL350 and 3.2 seconds for the SL500 make the new SL’s excellent characteristics in this discipline plain for all to behold.
“The new BlueDIRECT engines in the SL with six and eight cylinders form a unique synthesis of effortlessly superior power delivery, comfort and consuption”, comments Professor Dr Thomas Weber, responsible for corporate research and development at Mercedes-Benz Cars on the Board of Management of Daimler AG. “Both impress in the new SL, delivering refinement of the highest calibre and exemplary environmental acceptability.”
The V8 is in a new league of its own
The new V8 was systematically enhanced on the basis of the very successful predecessor. Mercedes-Benz engineers primarily achieved a high output for a lower displacement by using one turbocharger for each bank of cylinders. The turbochargers were configured to provide high torque even at low engine speeds – compared to the previous engine, the result is an increase of more than 40 percent at 2000 rpm. A superb 700 Nm are available between 1600 and 4750 rpm.
The V6 impresses with its low fuel consumption and high comfort
The new six-cylinder is a naturally aspirated engine. The most striking change between the new V6 unit and its predecessor is a reduction in the V-angle between the cylinder banks from 90 degrees to 60 degrees. This enabled the balancer shaft counteracting primary vibrations to be omitted, and as a result the driver registers an outstanding level of comfort.
Innovative technology makes V6 and V8 engines fit for the future
Both the new V6 and the new V8 from Mercedes-Benz are derived from their predecessors. They have aluminium crankcases, pistons and cylinder heads. The crankshaft, connecting rods and valves are of special forged steel. Practically all the details were, however, newly developed or revised with the aim of achieving more fuel economy, more output and more refinement.
The technology package in the new engine generation includes a number of new developments that are unique in this combination:
ECO start/stop function with direct-start
The standard-specification ECO start/stop function operates with starter-supported direct-start. This means that when the engine is switched off, the attitude of the crankshaft is registered by a new crankshaft sensor so that the engine control unit knows the positions of the individual pistons. On restarting, it can then select the cylinder that is in the most suitable position for first ignition. After the starter has briefly turned over the engine, reliable injection, ignition and combustion is immediately possible there.
An additional, demand-controlled electric transmission oil pump supplies the clutches of the automatic transmission with oil pressure prior to starting, so as to enable a swift resumption of the journey after direct starting of the combustion engine via the ECO start/stop function. The starter motor (starter) has also undergone thorough modification: it is now designed to be highly durable, ensuring that it will last a car’s lifetime in continuous urban driving involving frequent auto-starting. In addition, the on-board electrical system is supported by a second battery. As is the case with the starter battery (95 Ah), the “auxiliary battery” (12 Ah) also features maintenance-free AGM technology (AGM = absorbed glass mat).
Intelligent alternator management
Its intelligent alternator management also contributes to the luxury roadster’s sensitive treatment of energy. When the battery is charged to more than 80 percent, the alternator is governed to take load off the engine. The energy required in this operating state is supplied by the battery. If the driver removes their foot from the accelerator pedal or applies the brakes, kinetic energy is recovered and fed to the battery.
Automatic transmission for less consumption and more fun at the wheel
All Mercedes-Benz SL-Class models come with the 7G-TRONIC PLUS automatic transmission as standard. Now in its sixth generation, the multi-ratio automatic transmission was developed by Mercedes-Benz and has been produced since 1960. The new version has once again been thoroughly revised to optimise consumption and comfort compared with its predecessor. The new generation of the torque converter provides an improved dynamic response and reduced noise and vibration levels thanks to a new hydraulic circuit, as well as enhanced dampers and an optimised torque converter housing. The extreme wheel-slip reduction of the torque converter housing, combined with
This results in more driving enjoyment than was the case with the predecessor transmission – and also improved smoothness, not to mention an average of seven percent less consumption (in the NEDC).
What’s more, the increased durability of the new oil also brings with it new oil-change intervals from 50,000 (old) to 125,000 kilometres (new).
DIRECT SELECT gearshift with designer chic and athletic allure
Mercedes-Benz is equipping the new SL with the newly developed DIRECT SELECT gearshift in the centre console – the first vehicle with an automatic transmission to receive this honour. In so doing, the premium brand is establishing a completely new generation of central gearshift for vehicles featuring shift-by-wire (ShW) transmission technology. Its small control lever, reminiscent of a high-calibre joystick, has a driver-oriented position, being installed on the centre console. Its striking design not only underlines the sporty character of the roadster; it also emphasises the high quality of the SL with its exquisite touch and feel, superb ergonomics and unique look.
In addition to an Eco program, the 7G-TRONIC PLUS in the new SL also offers a sports-oriented automatic program. Over and above this, the driver can also select a manual shift program which they operate via the paddles on the steering wheel – which also come as part of the standard specification.
The two automatic programs automatically adjust on a continuous basis in line with the driver’s behaviour. By way of example, if they step on the accelerator pedal more dynamically than before, the shift points automatically move towards more sportiness. In the ECO mode, the shift program is configured differently for lower engine speeds during cruising, thus saving fuel.
In the sportily oriented automatic program, the output is available more spontaneously and it shifts faster. The double-declutching function and active downshifts have been systematically enhanced. During heavy braking, the transmission shifts down considerably earlier, so higher engine speeds make the acceleration which follows easier. The double-declutching function, in which the engine speed is actively raised with an abrupt acceleration, ensures faster and more comfortable downshifting. The concomitant acoustic response underlines a sporty driving style and enhances the unique roadster feel.
In the manual transmission mode controlled using shift paddles on the steering wheel, the engine responds to the throttle over a steeper characteristic pedal curve. Selecting the gear via the steering-wheel gearshift buttons facilitates minimal shift times and emphasises the sporty double declutching. In manual mode, the gear indicator in the instrument cluster moves to a separate section of the colour display, where it shows the seven available gears plus the gear currently selected.
Chassis and suspension: Best contact with the road
Powerful when accelerating, effortlessly superior at every speed, zappy on winding stretches – the new SL is a shining example, displaying perfect manners on all the world’s roads and in all driving situations. What’s more, it also pampers all the senses with any amount of fun at the wheel. For these emotive experiences SL drivers can thank the potent engines – and above all the sporty, agile tuning of the suspension – which is nevertheless very comfortable, being offered in the form of two different systems for the SL:
The Mercedes-Benz SL-Class features semi-active adjustable damping as standard. The optional active suspension system ABC (Active Body Control) is offered as an alternative.
The spring struts which come as part of the standard equipment combine a steel spring with a continuously adjustable damper. Its damping properties can be varied via an electrically controlled valve.
Continuous adjustment of the damping in accordance with the respective driving situation is taken care of fully automatically by control electronics which record the driving condition in question via sensors. The control unit uses the sensor data to determine the necessary damping forces for optimum comfort and handling. On this basis it steplessly regulates the damping valves at every wheel within a broad damping characteristic so that sprung mass vibrations such as lifting, rolling and pitching are minimised on uneven roads. As a result, the new SL gives its occupants a smooth ride even on poor roads, without relinquishing any driving dynamics.
The semi-active adjustable damping also rapidly counteracts sprung mass vibrations caused by the driver, by adjusting the damping characteristics. By way of example, the dynamic anti-roll and anti-pitch support compensates for pitch ensuing from braking and accelerating, and quickly and effectively stems rolling motion which is initiated above all by cornering or jerking the steering wheel during a dynamic evasive manoeuvre. Torsion bars at the front and rear axle help to reduce wide roll angles when cornering, and positively influence the understeer/oversteer characteristics.
Setting the basic characteristics of the suspension is still left to the driver, however, using a switch that enables them to choose from a broad spectrum ranging from comfortable to sporty damping characteristics. At the touch of a button they can therefore have a chassis and suspension set-up available which places more emphasis on comfort, for instance, whilst if they choose the sports setting, they are opting for a driving experience with a very high level of dynamic response.
Sports suspension in the AMG Sports package
A variant of this suspension is offered in the AMG Sports package. This sports suspension lowers the roadster by ten millimetres, the spring strut and torsion bars are configured to be ten percent more rigid and the parameterisation of the adjustable damping is selected in such a way that the sprung mass vibration is dampened more strongly – all measures which underline the vehicle’s sporty character.
ABC suspension for high levels of comfort
As an option the new Mercedes SL is available with the unique active suspension system ABC (Active Body Control) as an alternative. It has been further improved for the new SL by the Mercedes-Benz chassis and suspension specialists. This system’s highly effective control elements are spring struts with a hydraulic steel cylinder arranged in line with the steel spring. When this cylinder retracts and extends, it actively adjusts the length of the spring and therefore the spring force in the spring strut. This eliminates the need for torsion bars at the front and rear axle.
With this technology an automatically controlled electronic system permanently adjusts the suspension to suit the driving situation and the road condition without any perceptible delay. This means that the active suspension system ABC can raise comfort to a high level, whilst simultaneously improving the roadster’s driving dynamics. This is possible as it almost completely compensates the vehicle body’s rolling and pitching movements when accelerating, braking and cornering. In addition to this, at the touch of a button it offers a unique, further increased spread of suspension settings between sports and comfort.
As the vibrations initiated by irregularities in the road surface are greatly reduced, the occupants in the SL experience a vehicle with perfect absorption capacity on poor roads. Above all it is alternating sprung mass vibrations (“cross-pitching”) which are extremely minimal.
Sprung mass vibrations which arise through the driver’s influence are also almost entirely ironed out – this is the case, for instance, when the body rolls during steering or when there is pitching during braking and accelerating. The occupants experience a vehicle which drives “as if on rails”, but without having to pay for this with the usual reduction in ride comfort which is typical of sports suspensions.
As the ABC system modifies the roll torque distribution depending on the driving speed, the driver experiences handling which changes with the driving speed. It varies from motoring pleasure where one can afford it in driving dynamics terms to directional stability where it is most needed. In other words, on winding rural roads the roadster moves with nimble agility, and on motorway stretches it stays safely on track and does not worry the driver with any nervous reactions.
The ABC system is also fitted with a hydraulic all-round level control system, thus ensuring a constant vehicle level irrespective of the load. When the engine is running, the driver can raise the level of the vehicle at the touch of a button, both when the vehicle is at a standstill and during the journey. Thanks to a new feature in the SL, if the level is raised by 50 millimetres in this way, the ground clearance for rough roads or ramps is increased. In addition, the SL fitted with ABC is automatically lowered by up to 13 millimetres at high speeds, thus lowering the centre of gravity and wind resistance – and therefore also the fuel consumption.
More track, less unsprung weight
The track and wheel suspension are the same in the case of both suspension variants. In favour of sporty, agile and handling which can be safely kept under control, the new Mercedes-Benz SL-Class has a considerably wider track than the predecessor (front axle plus 38 mm, rear axle plus 63 mm).
At the front axle, the tried-and-trusted principle of the 4-link front suspension has been adopted from the previous model series. It achieved superb results where comfort, dynamism, agility plus active and passive safety are concerned. Most importantly they are characterised by two individual links (a torque strut and a spring link), which are included in place of a lower wishbone. In conjunction with the ABC suspension no torsion bar is necessary.
In order to optimise the front axle even further in terms of weight, in the new SL the steering knuckle and the spring link are also made of aluminium. The lower front axle elements, the steering gear and the engine mounts are linked with an aluminium assembly carrier which is directly bolted to the body.
A lightweight construction was also systematically implemented at the rear axle, too. In order to reduce the unsprung masses, virtually all the suspension parts are made of aluminium, as is the subframe with load-matched panel thicknesses. The weight-reduced rear axle carrier consists of high-strength steel.
But the focus was not just on saving weight when developing the rear axle; the engineers have also optimised the kinematics and elastokinematics, with the objective of achieving more agility. Other results of the new configuration are lower forces, which considerably increases comfort. An additional support linking the rear subframe bearing to the bodywork also has a positive effect on the new SL’s ride comfort. It increases the introduction rigidity – a parameter whose properties include excellent road roar characteristics where NVH (noise, vibration, harshness) qualities are concerned. Thanks to these constructive measures relating to materials technology, the new luxury roadster offers a chassis with outstanding comfort coupled with excellent driving dynamics.
Like its predecessor, the new SL with adjustable damping also has an anti-roll bar, which is mounted directly at the rear axle and assembled together with the subframe, and serves to reduce the connection points with the bodyshell.
The chassis has a virtually neutral configuration, pleasing sporty drivers. In particular in the range from 60 to 130 km/h it reacts with enormous agility, and therefore facilitates a great deal of fun at the wheel on rural roads. In so doing the SL allows lateral accelerations which are impressive even for a sports car. Two different programs can be selected for the ESP®. The control interventions from the more sportily tuned variant allow side-slip angles during accelerated cornering – offering adept drivers plenty of motoring pleasure. At the same time it can be driven more easily and safely at higher speeds.
Electric Direct-Steer system for more driving dynamics
The broad spread of suspension settings is supported by a new electromechanical Direct-Steer system with speed-sensitive steering power assistance and a variable steering ratio that changes according to the steering angle. The ratio is very indirect when the steering is centred, which ensures good straight-line stability and therefore a high level of safety. In contrast to other variable steering systems, the ratio of the Direct-Steer system decreases rapidly after a steering angle of 5 degrees, becoming extremely direct from a steering angle of just 100 degrees. Only relatively small steering movements are then needed to make course corrections.
In contrast to the predecessor, the Direct-Steer system optimises the ratio course. This enables the new SL to shine with yet more agility, making cornering even more fun as a result. At the same time, through the new ratio course the maximum steering effort required when parking or turning is reduced by about 15 percent. This means that only 2.2 turns of the steering wheel from limit to limit are now necessary.
This has the following effect in practice: even at urban driving speeds, the driver needs to perform less pronounced steering movements, making changes in direction possible more rapidly and with less effort. The effect of the Direct-Steer system is even more impressive on winding country roads, where only small steering movements are sufficient to steer the vehicle. Even on tighter bends, the driver’s hands hardly need to change their grip on the steering wheel. Rapid sequences of bends can be mastered safely and precisely, and with enormous enjoyment.
Despite its remarkable effect, the key component of the Direct-Steer system is a simple steering rack. Its secret lies in the teeth cut into it. In the mid-area these are slightly wave-shaped, with varying flank profiles. To both sides the teeth are spaced at varying distances apart. The change in steering ratio is therefore produced by purely mechanical means. With this ingenious solution, Mercedes engineers have been able to dispense with the elaborate actuators and complex sensor systems used by other variable steering systems. The advantages of the Direct-Steer system therefore include very low susceptibility to faults and low weight. Moreover, the system always responds predictably and in the same way at each steering angle, while other variable steering systems sometimes require rapid adaptation by the driver in rapidly changing situations.
Instead of hydraulically, as is the case with the familiar speed-sensitive steering from Mercedes-Benz, the Direct-Steer system in the SL regulates the steering force electrically. This is taken care of by an electric motor – positioned axially parallel to the toothed rack – which transfers its power to the ball screw as a rotary movement via a toothed belt. The electric motor, drive unit, control unit and sensor system are integrated in a compact unit.
The control unit evaluates a large number of input variables in order to configure the steering torque optimally in accordance with the situation in question. A torque sensor determines the necessary assistance required at the steering-gear input shaft. In so doing the electronics take into account, for example, different vehicle axle loads. Due to the different engine weights, the characteristic maps for six-cylinder and eight-cylinder models are proof positive of the engineering artistry that lies behind the system.
Further advantages of the electric steering:
Assistance for critical road surface conditions
A further assistance function has been realised in the new SL thanks to the electromechanical steering power assistance – the Steer Assist system: it can support stabilisation of the vehicle if the vehicle brakes on a road surface with different friction (µ-split) on the left and right, making it pull to one side. Drivers can find themselves confronted with this situation, for example, on a road surface which is covered with ice on one side. When braking, the vehicle then turns in the direction of the high friction – referred to by experts as a yaw impulse.
In this case the steering assistance system indicates to the driver via the steering wheel that they should countersteer in the correct direction in order to compensate for the yaw impulse caused by the difference in friction – until the vehicle has stabilised again. In order to do this the control unit evaluates the difference between the ABS pressures on the right and left, giving an indication of different road surface friction coefficients, and it also includes the ESP® data which register oversteer in this sort of situation.
By way of indication, the electric steering power assistance impresses a steering torque which supports the driver’s own reaction like a suggestion. This steering torque, which causes the driver to steer correctly through a light impulse, is hardly perceptible, and most of the time it is not even noticed at all. Nevertheless the assistance function is effective. However the steering assistance system merely provides an indication of the direction in which the driver should steer in order to stabilise the vehicle; it does not overrule the driver.
Brakes for sporty driving enjoyment
The new SL has adopted the proven braking system with a dual-circuit brake and the split of the two braking circuits between the front and rear axle from the predecessor model. At the front all the variants are equipped with newly developed 4-piston fixed-calibre brakes with an aluminium monobloc design and perforated brake discs. 1-piston combined floating brake callipers are fitted at the rear.
In order to be able to provide the required output from the braking system, the heat arising at the brakes must be removed as quickly as possible. This is why special attention was given to aerodynamically favourable and highly effective brake cooling. On the basis of different wind tunnel and road tests, the aerodynamics engineers developed a system comprising several components for targeted air ducting in the front axle area. A brake air channel has been integrated into the front engine compartment trim in order to guide the air over the front wheel spoiler in a targeted manner and steer it onto a guide blade. The guide blade fixed to the front suspension link diverts the air coming from the brake air channel over the brake discs to the exterior. Together with a front matched wheel spoiler, this has achieved effective cooling of the brakes. The newly developed brake cover plates consist of steel at the front axle and aluminium at the rear axle.
Electric parking brake with emergency braking function
As a new feature in the SL, the electrically operated parking brake helps in the design of a generous interior. Its switch is located in the dashboard, under the rotary light switch. Pressing this engages the electric parking brake, and pulling releases it. It is also released automatically as soon as the engine is running, the transmission is in the D or R position, the driver has a fastened seat belt and the accelerator is operated.
Under normal circumstances, irrespective of the duration of operating, the electric parking brake only closes the responsible combined floating brake calliper at the rear axle fully and for a sustained period when the vehicle is at a standstill or at speeds below 4 km/h. Provision has also been made for an emergency braking function: if the driver pressed the electric parking brake at a speed higher than 4 km/h, the SL brakes to a safe stop with the aid of the service brake. In this case, the emergency braking function is taken care of by the hydraulic unit of the ESP®, with the brake lights also lighting up.
The emergency braking is interrupted as soon as the control element is no longer kept depressed.
Torque Vectoring Brakes: ESP® helps with the steering
The new SL includes the Torque Vectoring Brakes system as part of its standard specification. This ensures an additional safety margin at the physical limits, makes the roadster even more agile and therefore enhances its sportiness. The system achieves this with targeted, one-sided braking intervention by the Electronic Stability Program ESP® at the inside rear wheel when cornering. If ESP® detects a tendency to understeer, the Torque Vectoring Brakes generate a defined turning or yawing moment around the vehicle’s vertical axis within fractions of a second. Thanks to the different torque distribution that results, the SL turns into the bend under precise control without any loss of handling dynamics. The advantage of this solution over complex mechanical components such as an active steering rear axle, additional multi-disc clutches or an active differential is that the Torque Vectoring Brakes can be implemented without an increase in vehicle weight and therefore no disadvantages in terms of fuel consumption.
Wheels and tyres – a broad base for the SL
As part of its standard specification the SL350 is fitted with 17-inch light-alloy wheels with 255/45 R17 tyres – options ranging up to 19-inch wheels are available for selection on request. The SL500 is shod as standard with 18-inch wheels with mixed-size tyres (8.5 J x 18 ET 35.5 with 255/40 R 18 tyres at the front, and 9.5 J x 18 ET 47.5 wheels with 285/35 R 18 tyres at the rear).
Safety: Top technology for the greatest possible safety
Mercedes-Benz drivers are safer than drivers of other brands when out on the roads. This is the result of an investigation carried out by Mercedes-Benz accident research on the basis of official, anonymised random data checks by Germany’s Federal Statistical Office. It underlines the efficacy of the comprehensive Mercedes-Benz safety philosophy. This involves the experts not contenting themselves with achieving rating targets, but working intensively on attaining a level of safety which far exceeds the standards stipulated by the world’s legislators. An important measure of their work is not the laboratory or crash test facility, but actual accident incidents. The results of the work carried out by the safety experts at Mercedes-Benz is known as Real Life Safety, a concept which is based on research into thousands of accidents. Using this irrefutable evidence, for their holistic safety concept they have developed or initiated most of the assistance systems which today effectively support drivers and have been adopted by many of the company’s competitors.
“The new Mercedes-Benz SL sets new standards for roadsters and can confidently be referred to as the safest roadster in the world”, remarks Professor Dr Rodolfo Schöneburg, Director of Passive Safety at Mercedes-Benz. “The rigid aluminium bodyshell offers superb preconditions for a stable occupant cell, as well as for precisely defined deformation zones. This provides optimum protection for the occupants in the event of an accident. But we do not just think about those inside the vehicle – we also consider the other road users, for instance through effective pedestrian protection measures or assistance systems which also protect other motorists.”
During the development process for the new Mercedes-Benz SL-Class the requirements of Euro NCAP and other rating institutes were taken into account. The basis for this is a new light-alloy bodyshell which is formed mainly by extruded sections and cast nodes made of aluminium. It facilitates a light yet stable cell compound for a highly rigid occupant cell. In conjunction with this the tail end and front are designed in such a way that in the event of an accident they can absorb high forces through deformation, thus considerably reducing the strain on the occupants in a crash in accordance with the principle of the crumple zone. The crash boxes behind the bumper trim and an exchangeable front module ensure that the damage sustained during a front impact at up to 15 km/h can be limited.
Protection in the event of an overturn
The occupants in the new SL enjoy good protection in the case of a potential overturn, too. A-pillars in a steel/aluminium material mix and two roll-over bars can protect the passenger compartment. Normally the two roll-over bars are completely recessed, so they do not interrupt the look of the elegant, luxury roadster’s flowing lines. They are located in two cartridges fixed to the bodyshell in the area behind the seat backrests. If the system of crash sensors detects a potential overturn, the airbag control unit emits a signal and the deployment mechanism is activated. Two preloaded pressure springs per cartridge see to it that the roll-over protection shoots to the support position in fractions of a second.
Headbag and crash-responsive head restraints
The restraint systems with two-stage driver and front passenger airbags have been enhanced. A headbag provides generous lateral protection for the head impact area. An additional thorax airbag in the seat backrest can protect the upper body in the event of a side impact. The seat belts, with inertia-reel tensioners and belt force limiters, serve to highlight the high safety standards of Mercedes-Benz.
Another new feature finding its way into the standard equipment of the SL comes in the form of the NECK-PRO crash-responsive head restraints, developed by Mercedes-Benz. They can support the driver’s and passenger’s head in the event of a rear impact and reduce the risk of whiplash. Also fitted as standard is automatic child seat recognition. The ISOFIX system is available as an optional extra.
Protection for pedestrians
The new Mercedes-Benz SL-Class Roadster uses the latest technology in the area of pedestrian protection, too. A sensor system is able to register an impact with a pedestrian and can ensure that the bonnet is immediately raised by 85 mm in the rear section. This creates additional space between the bonnet and the components in the engine compartment. This in turn results in comparatively lower acceleration values for the head of a pedestrian during the impact, thus reducing the overall risk of injury.
The deformation properties of the bonnet have also been specifically designed to meet the requirements concerning pedestrian protection. It consists of aluminium with a homogenous reinforcement on the inside of the bonnet and can therefore further reduce the loads in case of an accident. The SL’s “soft nose” also provides a large impact area, whilst the foam density and geometry in the front bumper have been optimised for reduced loads during leg impact with the pedestrian.
Only available from Mercedes-Benz – the anticipatory occupant protection system PRE-SAFE®
An additional safety highlight is the standard-specification anticipatory occupant protection system PRE-SAFE®, a system developed by Mercedes-Benz and unique throughout the world. If it detects an acute risk of an accident, it reflexively activates precautionary protective measures for the vehicle occupants, also including the reversible, electromotive belt tensioning function which ensures that the occupants are better secured so that the seat belts and airbags are able to perform their protective function to the full during an impact. Mercedes-Benz developed PRE-SAFE® on the basis of research into actual accidents, and is the only manufacturer in the world to offer such a system.
Following an accident – optimally prepared
Mercedes-Benz’s holistic safety concept involves considering the phase after an accident. This is why the new SL has numerous post-crash measures incorporated on board which facilitate rapid assistance should the worst come to the worst: depending on the type of accident and the impact severity, the doors can be automatically unlocked, the interior lighting activated and the side windows opened by 50 millimetres to provide better ventilation in the interior. In addition to this, the steering wheel can be slid upwards. The concept is completed by the Guidelines for Rescue Services and the rescue cards which can be downloaded from the internet free of charge and which can serve as a valuable support for fire brigades.
ATTENTION ASSIST and ADAPTIVE BRAKE as standard
The new SL also features a unique combination of driver assistance systems which help to avoid accidents. These include the drowsiness detection system ATTENTION ASSIST, for example. Thanks to this system, the roadster develops a precise feeling for the level of attentiveness of the driver and can provide an early warning of overtiredness.
Also making up part of the standard equipment specification is the ADAPTIVE BRAKE. It comprises ABS, the acceleration skid control system ASR and also active yaw control (GMR). In addition, it features the following functions:
The ADAPTIVE BRAKE works in conjunction with the equally adaptive brake lights. In emergency braking situations, it warns vehicles behind with rapidly flashing brake lights.
PRE-SAFE® Brake: autonomous partial and emergency braking in response to a serious risk of a rear-end collision
Available as optional extras are the DISTRONIC PLUS proximity control as well as the PRE-SAFE® Brake, already tried and tested in other Mercedes-Benz models. The two systems together and can initiate emergency braking automatically on detecting an acute risk of an accident.
In normal driving conditions, the radar-based DISTRONIC PLUS proximity control adjusts the distance to the vehicle in front automatically. If necessary, it can apply the brakes, even bringing the SL Roadster to a stop, and accelerate it again. This takes some of the strain off the driver, particularly in bumper-to-bumper driving conditions. If the distance starts to narrow too quickly, the system gives the driver visual and acoustic warnings, thereby prompting the driver to take action, at which point they are also supported by Brake Assist PLUS (BAS PLUS).
If the systems detect the acute danger of a rear-end collision and the driver fails to respond to visual and acoustic warnings, the electronics activate the PRE-SAFE® Brake in preparation for autonomous braking. This happens in two stages:
Around 1.6 seconds before the calculated impact point, the car initiates autonomous partial braking with around 40 percent (approx. four m/s²) of the maximum braking power, gives the driver an additional, haptic warning of the impending impact and as a precaution activates the reversible PRE-SAFE® occupant protection systems.
If the driver still fails to react, the PRE-SAFE® Brake activates the maximum braking power around 0.6 seconds before the now unavoidable collision – this emergency braking can greatly reduce the severity of the impact. The system therefore acts like an “electronic crumple zone”, offering the car occupants even greater protection.
The PRE-SAFE® Brake is active at speeds of between 30 and 200 km/h when moving vehicles are detected in front of the car. The system also reacts if the car approaches a stationary queue of traffic, providing the car’s speed is below 70 km/h.
The functionality of DISTRONIC PLUS has been enhanced even further. It now reacts earlier to vehicles which cut in, and the car accelerates quicker when changing lanes itself and where the overtaking lane is clear. Thanks to the incorporation of information from digital maps (navigation mode), automatic control has also been further refined.
Intelligent Light System – good vision at all times
The Intelligent Light System also comes as part of the standard specification. It offers variably controllable headlamps with five different light functions which are adapted to suit driving and weather situations commonly encountered. They switch themselves on depending on the prevailing driving situation, offering the motorist a considerably greater field of vision:
Adaptive Highbeam Assist is also on board as part of the standard specification: when vehicles are detected ahead of or approaching the vehicle, this system automatically dips the beams and adjusts the range of the headlamps according to the distance.
The assistance systems spring into action
Those wanting to can choose to extend the potpourri of assistance systems in the new SL even further. They provide extra doses of both safety and comfort. As an option Mercedes-Benz can equip the roadster with the following helpful features:
Hands off the steering wheel when parking
Active Parking Assist will answer the prayers of many drivers in the chronically congested traffic areas of Europe: the SL can not only detect parking spaces, but also help with the parking itself. This is made possible thanks to a combination of the new electromechanical Direct-Steer system (please see the chapter on the chassis and suspension) and a series of ultrasonic sensors. This convenience system features the following functions:
Two ultrasonic sensors take care of the search for suitable parking spaces lengthwise in the direction of travel. They are integrated in the front bumper, on the left and right. If the speed falls below 30 km/h, a “P” symbol in the instrument cluster signals to the driver that the active search for a parking place has been started automatically. If the system has found a potential parking space, an arrow indicates this alongside the “P” symbol. As standard, the arrow shows parking spaces on the passenger side. If the indicator on the driver’s side has been activated, it shows potential parking spaces on the driver’s side.
It is up to the driver to assess whether the free area designated by the system is indeed actually a parking space. Even during the parking procedure the responsibility remains with the driver. They activate the accelerator and brake pedals during parking. The Active Parking Assist takes care of the steering and for orientation it uses the two front ultrasonic sensors as well as four further sensors in the rear bumper. During parking, the roadster must not move faster than 10 km/h. The automatic parking manoeuvre is configured for a maximum of five turns (backwards-forwards-backwards-forwards-backwards). Once the vehicle is standing correctly in the automatically selected parking space, the system aligns the wheels.
The Active Parking Assist switches itself off as soon as the driver intervenes in the automatic turning of the steering wheel, if the system is turned off via the PTS button (Parktronic sensor), both if the driver’s seat belt buckle or the driver’s door is open, or if there is a system error. Nevertheless the familiar PARKTRONIC function remains available without any restrictions.
Infotainment: The fully integral sound of tomorrow
As a rule, those gifted with a sensitive sense of hearing cannot expect much listening enjoyment in a roadster. Even good car radios and CD players are disappointing under these arduous acoustic conditions. Instead, in open-top cars, the music flies away with the wind; it frays and breaks up in all directions without its acoustic base – passengers generally have to be satisfied with a woolly “sound carpet”, or close the roof. Open-air pleasure and musical enjoyment could hardly be expected in a roadster. A great part of the blame for this lies with the location of the bass loudspeakers in the doors or under a seat. Mercedes-Benz now presents a solution to this conflict: the unique Frontbass system, which at last creates the conditions for a concert hall ambience in a roadster too. In the new SL, the Frontbass system is celebrating its world premiere.
Crisp bass sound from the footwell
The principle sounds simple: Instead of being placed in the doors in the usual way, in the new SL generation the bass loudspeakers are installed in the footwell in front of the driver and passenger. This is not possible with traditional vehicle shell structures, but the two front longitudinal members in the front aluminium skeleton of the new Mercedes-Benz SL-Class provide the resonance space needed for this arrangement. The loudspeakers are fitted directly in two openings in the firewall on either side of the footwell. Cavities in the longitudinal members behind the speakers act as resonating chambers. The outstanding inherent rigidity of these structural components results in ultra-precise low notes with extremely little distortion, right up to very high signal levels. In order words, the new SL features clear, crisp bass sounds with a high dynamic range as part of its standard equipment.
The position of these two independent closed woofers in the footwell permits the creation of ideal acoustic conditions, because the firewall, the vehicle floor and the underside of the dashboard form a sort of funnel that focuses and concentrates the sound – a better sound performance is the result. The acoustic effectiveness improves significantly. The formula ‘low energy plus lots of sound volume’ saves energy on top of it all. This way, the Frontbass system also contributes towards a CO2 reduction.
Precise, brilliant sound
With the new Frontbass system, Mercedes-Benz is not only revolutionising in-car bass sound reproduction – and in particular aboard an open-top roadster – it is also creating the conditions for exceptional listening enjoyment. Since the bass loudspeakers now do not need to be installed in the doors, the disruptive acoustic vibrations typical of this configuration no longer occur. In addition to this, the sound experts have placed the mid-range and high-tone loudspeakers in the doors, the dashboard and in the vehicle rear optimally close to the beltline and thus almost at the same height as the SL occupants’ ears. This way they produce a precise, brilliant sound quality. The experts speak of an exact stage reproduction with precise instrument representation and an equally precise spatial graduation.
Even the standard entry-level Frontbass system creates a pronounced encircling sound feel and an emotive sound experience, independently of whether the vehicle roof is open or closed. As Norbert Niemczyk, responsible for the new Frontbass system at Mercedes-Benz, explains: “Our objective was not mere sound volume – although in this respect, too, the system performs amazingly – but a clear sound instead, one that never becomes “mushy”. We have achieved this. All those who experienced the sound with the Frontbass system for the first time got out of the car with a big smile on their face – in-house we call that the Frontbass smile.”
Friendly to the surroundings: focused sound
Acoustic enjoyment of the highest level is part of the programme in the new Mercedes SL both with a closed and with an open top. As the Frontbass system focuses the sound, the powerful sound is concentrated on the vehicle occupants – the surroundings are significantly less disturbed than is the case with conventional sound systems. Apart from this, the amplifier automatically controls the loudspeakers in a different manner depending on whether the passenger compartment is closed or open, according to the acoustic conditions, in order to create the best possible sound.
Frontbass is always on board
The Frontbass concept is the standard basis in every version of the new Mercedes-Benz SL. In the entry-level variant it is coupled with an amplifier that is integrated in the COMAND head unit with an output of 4×25 watts, two Frontbass loudspeakers with a diameter of 217 mm, two two-way systems for high and mid-range tones in the doors and two more mid-range speakers in the rear.
The optionally available Harman Kardon® Logic 7® surround sound system in conjunction with the Frontbass concept offers a further enhancement and a musical delicacy of concert hall quality. The heart of the matter is a Class D amplifier with a total output of 600 W and a digital signal processor (DSP) for ten audio channels. The two Frontbass loudspeakers and six two-way systems provide an even more precise and better defined sound reproduction quality.
Finally, the ultimate in high-calibre pleasure for the eyes and ears comes courtesy of the high-end Bang&Olufsen BeoSound AMG sound system, also available as an optional extra. The Class D ICE power amplifier and the Class D DSP amplifier with a total output of 900 watts actively control the twelve high-end loudspeakers via separate channels, thus ensuring the hallmark B&O crystal-clear sound reproduction. Via the B&O-specific True Image menu various sound settings such as the true-to-life studio-like reproduction in reference mode or a space-optimised reproduction in surround mode can be selected – and the sound fields can be precisely adjusted to the seats being used. In addition to this, the automatic volume regulation function Vehicle Noise Compensation automatically adjusts in accordance with the speed and the exterior and interior noises measured with a microphone, facilitating exclusive audiophile high-end sound at all times, irrespective of external influencing factors such as noises caused by the engine or the airflow.
High-end music enjoyment with the DVD “Mercedes-Benz Signature Sound”
So that SL drivers can fully appreciate and enjoy the Surround Sound and the unique Front Bass system, Mercedes-Benz has edited an exclusive, limited music DVD with the title “Mercedes-Benz Signature Sound”. The name stands for the unique signature sound of the musical pieces. It comprises 15 well-known pop/rock songs and 10 masterworks of classical music, re-worked and fine-tuned to the exceptional acoustic conditions of the roadster by Grammy-winning experts at one of the best sound studios in the world. Its transparent, crystal-clear sound provides a musical experience of the highest level. The DVD “Mercedes-Benz Signature Sound” can be found in every new SL Roadster that has been ordered with a Surround Sound system.
Bodyshell tuned to Frontbass
In order to realise the Frontbass concept, the sound specialists worked in close cooperation with the bodyshell designers right from the very first planning stage. A small welcome side effect is that since the Frontbass concept made the loudspeakers in the doors superfluous, the designers were able to use the space made free in the doors for additional stowage compartments.